Hexyl triazabutadiene as a potent alkylating agent

Alkyl diazonium ions are among the most reactive alkylating agents in the synthetic chemists’ arsenal. That said, there are precious few methods by which one can selectively and safely utilize this chemistry. Herein, we show the use of a bench stable hexyl triazabutadiene as a source of reactive diazonium ions that undergo substitution chemistry with weak nucleophiles, such as carboxylates and even sulfonates. In the absence of a nucleophile, elimination was observed to occur. To overcome issues stemming from side-product inhibition of the reaction, we show that the triazabutadiene can be pre-activated with tosyl isocyanate.     

Non-ablative capillary z-pinch for plasma-based waveguide

The conditions for the formations of plasma-based waveguide in non-ablative argon-filled capillary discharge are studied theoretically. The pinch dynamics is simulated using magneto-hydrodynamic code originally developed and utilized to find proper conditions for operation of capillary-discharge Ar⁺⁸ soft x-ray laser. The presented results show that the ablation-free capillary z-pinch provides conditions that are suitable for guiding of high-intensity laser pulses on the earlier stages of the plasma compression.     

Complete sequencing of mono—deprotonated peptide nucleic acids by sustained off-resonance irradiation collision—induced dissociation

Complete peptide nucleic acids (PNAs) sequence information is obtained from the unimolecular decomposition of singly-charged PNA oligomers in the negative-ion mode using electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR-MS) and sustained off-resonance irradiation collision induced dissociation. The 4-mers, n-CATT-c, n-AGCT-c, n-AACT-c, and n-acetylated-AACT-c and two 6-mers, n-AAAAAA-c and n-CCCCCC-c, were investigated to explore the unimolecular decomposition of mixed-nucleobase and homopolymer PNAs representing purine and pyrimidine oligomers, respectively. PNA decomposition is explored using a product-ion appearance curve and double resonance experiments. A decomposition mechanism for sequence ion formation (PNA amide bond cleavage) is proposed.     

二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫 Ⅳ.集总动力学

研究了水/甲苯乳化液中二苯并噻吩(硫芴)在分散型钼酸、磷钼酸和四硫代钼酸铵催化剂存在下的加氢脱硫反应.反应在高压釜中于340℃及三种不同的气氛即H2,H2/H2O和CO/H2O(CO和H2O经水煤气转换反应(WGSR)产生原位氢)的存在下进行.用GC和GC-MS鉴定、分析了气体和液体产物的组成.在此基础上,提出了包含直接氢解和加氢脱硫两个反应途径的硫芴加氢反应网络,并采用最优化法计算了反应网络的速率常数.结果表明:对所研究的9个反应体系,反应网络的模型预测值与试验值十分吻合;加氢路径比氢解路径至少快1倍,硫芴的加氢比联苯的加氢快1倍,部分加氢的中间产物1,2,3,4-四氢硫芴和1,2,3,4,10,11-六氢硫芴的氢解比硫芴直接氢解快10倍以上;对硫芴的加氢脱硫反应,在分散型钼存在下,原位产生的氢比加入的氢气更为有效.     

Use of carboxylic group functionalized magnetic nanoparticles for the preconcentration of metals in juice samples prior to the determination by capillary electrophoresis

Nowadays food industry demands reliable and precise methods to resolve problems related to quality and security control. The pretreatment steps, prior to sample analysis, are necessary to extract the target analytes because of the complexities of the food samples matrices. In this work, we have studied, for the first time, the potential of carboxylic group functionalized magnetic nanoparticles to preconcentrate metals from liquid samples before CE analysis. For the extraction of metals, 10 mL of an aqueous sample containing the metal mixture was added to 2 mg carboxylic group functionalized magnetic nanoparticles. Metals retained in the nanoparticles were re-extracted with 200 μL solution consisting of 0.8 mM 1,10-phenanthroline and 0.04% hydroxylamine chloride at pH 2. The electrophoretic buffer used in this work to separate different metals (Co, Cu, Zn, Ni, and Cd) consisted of 30 mM hydroxylamine chloride, 0.30 mM 1,10-phenanthroline, 80 mM urea, 15 mM ammonium chloride, and 0.1% methanol at pH 3.6. Finally, measurements were made at 270 nm. Under the optimized conditions, detection limits for Co, Zn, Cu, Ni, and Cd were 0.004, 0.003, 0.004, 0.008, and 0.009 mg L(-1) , respectively.     

Production of low sulfur diesel fuel via adsorption: an equilibrium and kinetic study on the adsorption of dibenzothiophene onto NaY zeolite

The adsorption of dibenzothiophene (DBT) in hexadecane onto NaY zeolite has been studied by performing equilibrium and kinetic adsorption experiments. The influence of several variables such as contact time, initial concentration of DBT and temperature on the adsorption has been investigated. The results show that the isothermal equilibrium can be represented by the Langmuir equation. The maximum adsorption capacity at different temperatures and the corresponding Langmuir constant (K _L ) have been deduced. The thermodynamic parameters (ΔG ⁰,ΔH ⁰,ΔS ⁰) for the adsorption of DBT have also been calculated from the temperature dependence of K _L using the van’t Hoff equation. The value of ΔH ⁰,ΔS ⁰ are found to be −30.3 kJ mol⁻¹ and −33.2 J mol⁻¹ K⁻¹ respectively. The adsorption is spontaneous and exothermic. The kinetics for the adsorption process can be described by either the Langmuir model or a pseudo-second-order model. It is found that the adsorption capacity and the initial rate of adsorption are dependent on contact time, temperature and the initial DBT concentration. The low apparent activation energy (12.4 kJ mol⁻¹) indicates that adsorption has a low potential barrier suggesting a mass transfer controlled process. In addition, the competitive adsorption between DBT, naphthalene and quinoline on NaY was also investigated.     

Crystallization of metallic nanoparticles on short DNA oligonucleotides in alkaline aqueous solution

Journal of Nanoparticle Research - A series of nickel phosphide catalysts with adjustable Brønsted acid sites and Lewis acid sites has been prepared by liquid-phase method using...     

Quenching Action of Monofunctional Sulfur Mustard on Chlorophyll Fluorescence: Towards an Ultrasensitive Biosensor

An ultrasensitive fluorimetric biosensor for the detection of chemical warfare agent sulfur mustard (SM) was developed using its monofunctional analogue. SM is a vesicant and a potent chemical threat owing to its direct toxic effects on eyes, lungs, skin and DNA. This work investigates the quenching action of the analyte on chlorophyll fluorescence as elucidated by nuclear magnetic resonance, Fourier transform infrared spectroscopy and mass spectrometry studies suggesting the electrophilic attack of carbonium ion on nitrogens of the porphyrin moiety of chlorophyll. The properties of immobilisation matrix were optimised and scanning electron microscope observations confirmed improvement in pore size of sol–gels by addition of 32 % (v/v) glycerol, a feature enabling enhanced sensitivity towards the analyte. Chlorophyll embedded sol–gel was treated with increasing concentrations of monofunctional SM and the corresponding drop in maximum fluorescence intensity as measured by emission at 673 nm was observed, which varied linearly and had a detection limit of 7.68?×?10^?16 M. The biosensor was found to be 6 orders of magnitude more sensitive than the glass microfibre-based disc biosensor previously reported by us.     

Mercury determination in sediments by CVAAS after on line preconcentration by solid phase extraction with a sol-gel sorbent containing CYANEX 471X®

The development of a preconcentration method for the measurement of trace levels of mercury in digested sediments is described. Solid phase extraction (SPE) was used for the preconcentration of mercury coupled on-line by means of a flow injection (FI) system followed by cold vapour atomic absorption spectrometry (CVAAS) detection. The SPE was carried out through a column packed with a sorbent material containing triisobutylphosphine sulfide (CYANEX 471X®) as mercury extractant and prepared by the sol-gel process. The effects of FI variables (argon, eluent, and reductant flow rates, loading and elution times) as well as the eluent concentration on the analytical performance of the method were evaluated. The proposed method was validated under the optimum conditions. The calibration graph was linear from 0.05?µg?L^?1 to 3.0 µg?L^?1 of Hg. The detection limit (DL), based on three times the standard deviation of the blank measurement criterion, was 24?ng^?L^?1. The repeatability was 1.5% and 1.8% RSD (n?=?10) at concentrations of 0.5 and 1 µg?L^?1 of Hg, respectively. Method enrichment factors of 16 with a productivity of 30 samples h^?1 or 32 with a productivity of 17 samples h^?1 were achieved under selected conditions. Certified reference materials, inductively coupled plasma mass spectroscopy (ICP-MS) and cold vapour atomic fluorescence spectrometry (CVAFS), were used to evaluate the accuracy of the proposed method.     

The rotational spectrum and hyperfine structure of arsenic monophosphide, AsP

Arsenic monophosphide has been prepared by laser ablation of arsenic in the presence of PH₃. The J = 2-1 and 1-0 transitions in both the ground and first excited vibrational states have been measured with a cavity pulsed jet Fourier-transform microwave spectrometer. An improved equilibrium internuclear distance (r_e) has been obtained. Hyperfine structure in the rotational spectrum of AsP has been resolved and has led to the first determinations of the As nuclear quadrupole coupling constant and both nuclear spin-rotation constants. The data enable the electronic structure of AsP to be compared with those of other mixed Group 15 diatomic molecules.